12v head with 60lb springs
#4
I know here in NY it was only $140 for Klispies machine shop to O-ring it and install the wire. They also decked my new head and checked for valve leaks, total was $440 for that, ARP stud milling (it requires milling the rocker towers), and cleaning up the exhaust ports and injector holes. If the head is clean and ready for machining (meaning its apart) they will o-ring it and install the wire for $150 bucks or so. They do some of the best work around, including the BigBadDodge truck, which is now owned by Joe Gambino here in WNY. He's the one who recommended them to me, and he does all sorts of machining there, as they do everything, and know these 5.9's inside and out.