no more 1/4 tank issues with big pumps!
#1
no more 1/4 tank issues with big pumps!
Ok, here is a sneak peak of the draw straw we are making along with Black Out Diesel Performance. This will cure your 1/4 tank issues. It is all aluminum and bolts onto the stock fuel canister (no need to buy a liberty canister either). We will be coming out with complete install instructions and will post more pics when I get back to Albuquerque after the holidays (Am in Idaho visiting family). We have one on the owners (black out) truck and have gone well below 1/8 tank with NO issues. We can also supply you the needed fuel line from the pickup to the fitting which is drilled and screwed onto the stock canister (oh ya, no more drilling holes in your fuel tank either!).
this pic shows the pick-up bolted in place. It does not move! I will post more pics when I get back to the shop.
MSRP $69.95 shipped
WELCOME 2009 SPECIAL til end of March 2009
this pic shows the pick-up bolted in place. It does not move! I will post more pics when I get back to the shop.
MSRP $69.95 shipped
WELCOME 2009 SPECIAL til end of March 2009
$59.95 SHIPPED
#3
Right now we have one on the truck we did the dual CP3's (the 6.7). Will fit all 3rd gen dodges. Working on 2nd Gen as well.
We are also selling completely modified fuel canisters for the early 3rd gen (03-05) with new fuel sending units. Let me know if anyone is interested. We have 5 that are being modified as we speak.
---AutoMerged DoublePost---
Here is a photo of the pick up inside a canister
Here is a side shot of the canister with hoses attached
We are also selling completely modified fuel canisters for the early 3rd gen (03-05) with new fuel sending units. Let me know if anyone is interested. We have 5 that are being modified as we speak.
---AutoMerged DoublePost---
Here is a photo of the pick up inside a canister
Here is a side shot of the canister with hoses attached
Last edited by cbrahs; 12-24-2008 at 08:26 PM. Reason: Automerged Doublepost
#10
will do bigred. I will post results as soon as we get the R&D completed. We are shooting for producing complete kits so you guys can mod your current canisters and have 1/2" lines with NO issues. Our 6.7 we are testing on right now, we pull it down to the fuel light and no issues. Does not cough, hesitate, stutter or anything. just keeps runnin (but we are haulin **** to the fuel station though! LOL)