Need a Value Set of Traction Bars Option
#51
#52
#54
Thanks man, it sucked big time.... They thought I had Lime at first, but ended up being a condition where your body attacks it self. Its pretty much gone except for the after effects of all the meds, and the heat really gets to me. I really dont know how somebody can spend months in the hospital since the two weeks I was in there felt like two years.
#55
#58
Well I am still not able to offer a bolt on kit like I would want, but for you guys that would rather build it yourself here is a kit for you. Tubing is 1.626 OD, and .3125 thick (about 4lbs a foot!) with 2in machined barrels, 1/4in universal brackets, poly bushings (red or black) bolts/nuts/washers etc.
Basic kit with 2 bars 48in long (saddle on both ends)
4 bushings kits with bolts/nuts/washers (red or black)
4 universal weld on axle brackets (notched for axle or flat)
4 universal weld on frame tabs
$165 plus shipping
$4 foot if you want longer than 48"
Basic kit with 2 bars 48in long (saddle on both ends)
4 bushings kits with bolts/nuts/washers (red or black)
4 universal weld on axle brackets (notched for axle or flat)
4 universal weld on frame tabs
$165 plus shipping
$4 foot if you want longer than 48"
#59
#60
If your makeing all the traction bars like that picture for different applications the people in the pulling field are goin to be upset. The size matterial you used is too small. All there going to do is bind. Because the set we built we used 2 inch round and 1/4 thick with 1/2 inch sold round stoch for braces and they bind like crazy going down the track