I have been having some cold start issues so decided to have a scanner put on the old girl to see what's going on. At 65 degrees the other day, still had a hard time starting after sitting for 2 days.

Glow plug test shows no faults with the Snap-on scanner. Previously, I manually ohmed out the glow plugs and they test good. I've been thru this system 3 times, so the basic "your glow plugs aren't working" response doesn't apply here.

The buzz test shows that I have a weak solenoid on cylinder #5. But the contribution test shows this cylinder to be putting out the power needed.

The contribution test does show that cylinder #3 is not putting out the power though.

I have taken off the ipr and cleaned and inspected. The icp isn't leaking oil and doesn't help starting if unplugged.

I plan on replacing the #3 injector due to no power output, but seeing the injector on #5 is putting out, would a solenoid be the fix for the weak buzz test?

The ole girl has 270,000 miles on her and I know the best case scenario would be to replace all the injectors. Sorry to say that this isn't an option right now, but I do need to keep her running right. These 2 issues were the only problems seen with the Snap-on scanner. IHOP pressure was good and such.

Only problem was that I had to drive 150 miles towing over 3000 lbs to do this test. The test was not when the problems exist, when it's cold.

Thanks for any and all replies or suggestions.