break light problems
#1
#4
did you check the blinker and hazards to see if they work i dont know about these trucks but some times relays and other fuses are tied into other fuses kind of like how the obd port and the cigg lighter are tied together id check all fuses and relays just to completely rule that out. there is a way to check the relay by putting a wire on one of the terminals and the other end to the battery i forget how to exactly do it i havent done it in a while but im sure there are videos and stuff on youtube on how to do it
#5
first off get a meter and check for voltage at the switch on the brake pedal... if you have voltage on one side and then you press the pedal down and get voltage at the other side you know the switch is good... so from there the wire will go all the way to the brake light so if you don't have voltage at the lights then you have a open wire somewhere...
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
12-07-2015 01:09 PM