Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Finally found a code. Anyone ever have same one??

Thread Tools
 
Search this Thread
 
  #1  
Old 01-31-2012 | 07:02 PM
1st Diesel's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2012
Posts: 178
Likes: 2
From: Jackson, MI
Default Finally found a code. Anyone ever have same one??

Code is P0279. It's Cylinder 7 Injector Circuit Low. Anyone ever have this code and figure out what exactly it was or how to fix it? Only code found. Mechanic did tests on EVERYTHING for the truck and this was the only one found. Tested engine, trans, turbo, everything literally. 03 F250 6.0L CC SB FX4. only mod is 3 1/2 straight pipe with a turn down behind the cab. . any help or suggestions appreciated.
 
  #2  
Old 01-31-2012 | 07:21 PM
Karls03's Avatar
Diesel Wrench
Joined: Mar 2010
Posts: 996
Likes: 49
From: Fallon, NV
Default

Cylinder 7!?! Man, I popped 1-8 when my FICM was puking! AFTER #8 was replaced.

But seriously, I had a code on number 8 injector when it stuck open. It was complete with that gasser V-8 "plug wire off miss" in the exhaust tone. I'm pretty loose with someone else's money, so I say change number 7.
 
  #3  
Old 02-01-2012 | 07:45 AM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Yeah, probably need to replace injector #7. This is the ONLY code?
 
  #4  
Old 02-01-2012 | 08:50 AM
1st Diesel's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2012
Posts: 178
Likes: 2
From: Jackson, MI
Default

Only code. I had one come up for crruise control but we didn't hit it when the scanner said to. I've used the cruise before to test it and it works fine.

---AutoMerged DoublePost---

I had a p0281 l that we found but it was just in the old memory and it never came up when doing any checks. Just wanna throw that out there
 

Last edited by 1st Diesel; 02-01-2012 at 08:50 AM. Reason: Automerged Doublepost
  #5  
Old 02-01-2012 | 10:21 AM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Yeah, probably injector #7. If you had some good spares I think you could technically just swap the electronics on the injector too, but sometimes that's more trouble than it's worth.
 
  #6  
Old 02-01-2012 | 12:23 PM
1st Diesel's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2012
Posts: 178
Likes: 2
From: Jackson, MI
Default

Ok. Lol. Yea I am just gonna tear into it and replace it and do new o rings. Then change the oil, run synthetic and add 2 bottles of Rev x to freshen her up
 
  #7  
Old 02-01-2012 | 12:31 PM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Sounds like a good plan of attack.
 
  #8  
Old 02-01-2012 | 01:25 PM
1st Diesel's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2012
Posts: 178
Likes: 2
From: Jackson, MI
Default

What's some good brand of synthetic to run in these motors?
 
  #9  
Old 02-01-2012 | 02:03 PM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Rotella 5w-40 T6 is popular, Amsoil's is pretty popular, as well as Valvoline premium blue 5W-40.
 
  #10  
Old 02-01-2012 | 07:11 PM
1st Diesel's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2012
Posts: 178
Likes: 2
From: Jackson, MI
Default

Awesome. Thank ya for the heads up on that sir
 


Quick Reply: Finally found a code. Anyone ever have same one??



All times are GMT -5. The time now is 12:17 PM.