up grades for my 6.0/ lookin for opinions
#21
09-06-2012 | 01:48 PM
Diesel Enthusiast
Joined: Aug 2009
Posts: 164
Likes: 23
I would also clean your intake while its apart 
If you tow a lot stick with 155cc or maybe 175cc, MTW stage 2 billet turbo, airdog 150 or 165, studs, gaskets, FICM tunes, SCT tunes, look at trans upgrades, oil cooler, egr delete, coolant swap.
Or you could get studs, gaskets, hybrid MTW turbo, keep your injectors, FICM tunes, SCT tunes. Then you would be sitting at 485hp with hardly any smoke, low egts, plenty of power, and your trans would be fine.
Scrap the analog gauges and get an insight from edge, scangauge, or dashboss so you can monitor engine parameters. Or get a scangauge for cheap and get the analog gauges too
If you tow a lot stick with 155cc or maybe 175cc, MTW stage 2 billet turbo, airdog 150 or 165, studs, gaskets, FICM tunes, SCT tunes, look at trans upgrades, oil cooler, egr delete, coolant swap.
Or you could get studs, gaskets, hybrid MTW turbo, keep your injectors, FICM tunes, SCT tunes. Then you would be sitting at 485hp with hardly any smoke, low egts, plenty of power, and your trans would be fine.
Scrap the analog gauges and get an insight from edge, scangauge, or dashboss so you can monitor engine parameters. Or get a scangauge for cheap and get the analog gauges too
Last edited by COLETRA1N; 09-06-2012 at 01:51 PM.
The following users liked this post:
Mdub707 (09-06-2012)
