Hello everyone new to the forum and have been reading alot about the 6.0 and have alot of reservations. I am looking to buy a 2006 F-250 6.0 with 80k. I have heard nightmare senerios about the 6.0. I was wondering if I where to buy it what would be the first thing I need to do to up my chances of a long engine life, by what I have read it sounds like the EGR delete. Also Go to a HP oil pump or is it just parts to the oil pump that need to replace or the whole assembly? I am really just going to be pulling horse trailers and such no real massive pulls planned. I would appriciate any help I can get. Should I run or put a few bucks in it and have a good reliable engine?
Thanks

 

Get an oasis report on it. I wouldnt buy another one. Had 2 Its a constant 500 to fix this 1000 to fix that then you blow your heads or lose a few injectors. If you spend a few grand on it it is a good engine. I would buy a 6.4 tune and delete the dpf and egr.

 

Its a 2006 if that changes anything. Oasis report is clean.

 

I had on 04 and an 06. Their are alot of guys who love their 6.0's and swear buy them. Like I said a few grand and you should be ok. And I wouldnt pay more than 18 for it at the most. Because I got 13,300 when I traded my 06 in with 128,000 on it.

 

And then blow the headgaskets from too much backpressure since you deleted the EGR without put a wastegate in? Not sure how that will end up any different than the 6.0. You can block it off and be OK, but still an issue on the hot tunes.


I agree, get an Oasis report first.


What are your plans for the truck? Is this something you want to mod and hot rod, or just a stock tower, or what?

 

I never had any issues out of either of my 04 or 05 6.0 Powerstrokes.

 

I just plan to have it as a stock puller not really looking to do much. Ive been researching a while because of the things I have heard. What I am Kind of getting is delete the EGR and get a cooler bypass. A Little confused about the oil cooler though is it just the bits and pieces that need replaced our the whole system. Or does that even need to be done with a bypass cooler installed. Thanks for any help I have read almost the whole forum and I know alot of things have been asked I am just tring to get it all down in one place where I can read it.

 

Check the Oasis first, it could be a problem truck, or it might be clean, never know. If you're going to run it stock, I'd get a coolant filter, a full egr delete, if you can, and while I was in there, I'd just throw a new oil cooler in, just to be safe. See if the STC fitting update has been done or not, if not, I would do that while it was apart. Other than that, it should be a pretty reliable truck. A good 4" turbo back exhaust, some gauges and an SCT with custom tuning wouldn't hurt either. You can get good solid towing tunes that don't add a lot of power, but help the trans tremendously.

IMO, the most important thing you can add to any 6.0 is a fuel pressure gauge. This will protect your expensive injectors.

 

So pretty much this (Basic Solution(TM) for Ford 6.0L Powerstroke With Sinister EGR Delete Kit, Oil Cooler and Intake Gaskets) and fuel pressure gauge and I should be good for what I plan.

 

If you get the full delete and not just the block off plates i am prety sure it comes with a wastegate.