Lost a socket in the throttle body now what?
#12
The magnet should work, if you can get it to bend in there. It's got to be right in that intake manifold. Worst case scenario, you take the intake manifold off, it's not that hard of a job at all, just time consuming. I bet you can get it with the magnet though. The Mass Air Flow deal is on top of the intake manifold, which is where I assume you dropped the socket in!? Maybe get a picture for us so we are clear as to where it went. Only the 03/04 trucks had the MAF on them anyways. You can unbolt the intake elbow and the MAF and you will be able to see into the intake better. I doubt it went far, there is probably a ton of sludge in there (like all of them) and it wouldn't let it bounce and roll all over.
#13
Well, after a whopping 5 mins it's out I do believe I learned a valuable lesson when working on the truck.....1. Put a rag in open holes in case you drop something
2. Never let the wife help me out, she just stress's me out
3. Calm down and think things through.
Thanks to everyone for their help, I'm just glad I got it out and no damage was done.
---AutoMerged DoublePost---
Oh almost forgot, while I was fishing the socket out, I noticed some, not a lot but a little bit of oil in the tube, is this normal? Was wondering cause now it is blowing blue smoke unless you get on it, it then clears up and stops until you stop and take off again.
2. Never let the wife help me out, she just stress's me out
3. Calm down and think things through.
Thanks to everyone for their help, I'm just glad I got it out and no damage was done.
---AutoMerged DoublePost---
Oh almost forgot, while I was fishing the socket out, I noticed some, not a lot but a little bit of oil in the tube, is this normal? Was wondering cause now it is blowing blue smoke unless you get on it, it then clears up and stops until you stop and take off again.
Last edited by Dirago; 06-24-2010 at 09:51 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
08-04-2015 09:00 PM
Diesel Bombers
Latest Automotive Industry News
0
03-13-2015 03:40 PM
1stgenswap
1st Generation Dodge Cummins 89-93
2
11-03-2014 09:45 PM