Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

wont start when hot

Thread Tools
 
Search this Thread
 
  #1  
Old 03-17-2010 | 09:07 PM
riddick01's Avatar
Thread Starter
|
Diesel Wrench
Joined: Feb 2010
Posts: 945
Likes: 67
From: Huntsville Tx
Default wont start when hot

ok...so im not the most diesel savy person out there but ive got an 06 250 with a 6.0 and it will start fine when cold(the typical cold start) but after running it for a little bit (to the gas station for coffee) it wont start back up...but if i let it sit and cool down for a bit then it will start ok...i had advanced auto parts check the alternator and its good...the batteries are no more than a few days old...

i think it might by a high pressure oil pump problem or something that is not working at temp
 
  #2  
Old 03-18-2010 | 08:13 AM
MUDSTROKIN''s Avatar
Diesel Bomber
Joined: Dec 2009
Posts: 1,650
Likes: 103
From: Roanoke,VA
Default

i'd say you most likely have a HPOP problem....
 
  #3  
Old 03-18-2010 | 11:17 AM
riddick01's Avatar
Thread Starter
|
Diesel Wrench
Joined: Feb 2010
Posts: 945
Likes: 67
From: Huntsville Tx
Default

thats what i thought to but i figured id post up here to see if anyone had any other ideas since i just put a new HPOP in a couple weeks before xmas...

i ran it to the dealership this mornin and thats what they think it is to so my next question is where do i look or who do i talk to about getting an aftermarket HPOP...this is the 3rd one if had and im only at 95K miles so i want to be able to eliminate this problem...
 
  #4  
Old 03-18-2010 | 01:58 PM
MUDSTROKIN''s Avatar
Diesel Bomber
Joined: Dec 2009
Posts: 1,650
Likes: 103
From: Roanoke,VA
Default

Hmmmm... dieselsite.com has upgraded HPOP i believe. you might wanna have the tech check out your whole high pressure oil system... i've heard of the standpipes having a problem with them too and causing these same symtoms... or it could be a problem in your High pressure oil rail too... just have the tech check out the whole system! hope this helps!
 
  #5  
Old 03-19-2010 | 12:07 AM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

There is a service bulletin for the STC (snap to connect) fitting. That is most likely the issue, it is very common.

Diesel Technician Society
Diesel Technician Society
2005 Update Page 04 Turbo High Pressure pump/Discharge tube-Oil Branch Tube-IPR Valve
 
  #6  
Old 03-19-2010 | 10:09 AM
MUDSTROKIN''s Avatar
Diesel Bomber
Joined: Dec 2009
Posts: 1,650
Likes: 103
From: Roanoke,VA
Default

^ very true i didn't even think of that... thanks for throwin that in there mdub!
 
  #7  
Old 03-23-2010 | 04:34 PM
riddick01's Avatar
Thread Starter
|
Diesel Wrench
Joined: Feb 2010
Posts: 945
Likes: 67
From: Huntsville Tx
Default

ok so called ford and they say that it is the HPOP and that since this is my third one in under 100k and my second since a couple weeks before xmas they r replacing the pump, housing, seals, and some other stuff to make sure its all good
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Accubuck
Diesel In Distress - Support Ticket
5
05-07-2015 04:46 PM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
Polaris04
Ford Powerstroke 03-07 6.0L
1
02-22-2015 09:07 AM
carid
Diesel Bombers Sponsors
0
11-18-2014 06:49 AM
powerstroke74
Ford Powerstroke 94-98 7.3L
8
10-29-2014 05:40 PM



Quick Reply: wont start when hot



All times are GMT -5. The time now is 10:25 AM.