Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

What is wrong with this 6.0?

Thread Tools
 
Search this Thread
 
  #1  
Old 09-06-2009 | 10:36 PM
Hummin Cummins's Avatar
Thread Starter
|
Diesel Wrench
Joined: Nov 2008
Posts: 574
Likes: 29
From: ND
Default What is wrong with this 6.0?

OK last week I blew the inter-cooler. Now today the EGT's were running high like 500 at idle and with a lite 8000 pound trailer (EMPTY) egts were 1200 just going 45 miles per hour on flat level land. Boost is normal around 25 up to 30. But when I let off the throttle the turbo will bark. Engine I would say was hotter then normal didn't see any coolant leaking but under the hood you could smell it slightly. No codes of course what should I check for?? Coolant level is normal, air filter is OK I wonder if the cat is getting plugged and that isn't my problem. Any ideas?? Truck is a 05 F-350 with 42,000 miles

One more thing the EGT's were running high the day the inter-cooler blew I thought something was wrong with the pyro. After the new inter-cooler the egts were normal. but with less then 200 miles egt's are high again. I know if I run the truck much something is going to go
 
  #2  
Old 09-06-2009 | 11:11 PM
Buckshotmckee's Avatar
Sma't Alec!
Joined: Mar 2007
Posts: 1,522
Likes: 135
From: God's Country
Default

Loose inter cooler boot? Check the clamps.
 
  #3  
Old 09-06-2009 | 11:21 PM
Big Angry Hillbilly's Avatar
Diesel Wrench
Joined: Jan 2009
Posts: 513
Likes: 46
Default

Turbo farting is usually a sign that the VGT is jammin up
 
  #4  
Old 09-07-2009 | 01:17 AM
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

orly?
 
  #5  
Old 09-07-2009 | 07:45 AM
no1glfhk's Avatar
Diesel Fan
Joined: Aug 2009
Posts: 19
Likes: 0
From: michigan
Default

Originally Posted by 2500HeavyDuty
orly?
I believe thats stands for Oh Really
 
  #6  
Old 09-07-2009 | 08:29 AM
Hummin Cummins's Avatar
Thread Starter
|
Diesel Wrench
Joined: Nov 2008
Posts: 574
Likes: 29
From: ND
Default

Originally Posted by Big Angry Hillbilly
Turbo farting is usually a sign that the VGT is jammin up
Is their any fix to the turbo if the veins are sticking?? Do you thiink this explains the eratic egt's???


I checked all the clamps they seem to be good.
 
  #7  
Old 09-07-2009 | 09:43 AM
puffsmokeonya's Avatar
Diesel Enthusiast
Joined: Nov 2008
Posts: 271
Likes: 27
From: harrison arkansas
Default

new turbo.
 
  #8  
Old 09-07-2009 | 01:48 PM
HeavyAssault's Avatar
Diesel Wrench
Joined: Jan 2009
Posts: 854
Likes: 62
From: VA
Default

Turbo farting is a result of building boost and letting off the accelerator rapidly. My truck does it and the VGT is not "jamming up".

You can remove the turbo and clean it yourself. The turbine side is where the cleaning occurs and is a basic procedure done by Ford.
 
  #9  
Old 09-08-2009 | 08:21 AM
Hummin Cummins's Avatar
Thread Starter
|
Diesel Wrench
Joined: Nov 2008
Posts: 574
Likes: 29
From: ND
Default

Originally Posted by HeavyAssault
Turbo farting is a result of building boost and letting off the accelerator rapidly. My truck does it and the VGT is not "jamming up".

You can remove the turbo and clean it yourself. The turbine side is where the cleaning occurs and is a basic procedure done by Ford.
I realize that letting off the accelerator rapidly will cause the turbo to fart. The turbo on the truck does it in all circumstances now.
 
  #10  
Old 09-08-2009 | 09:55 PM
Big Angry Hillbilly's Avatar
Diesel Wrench
Joined: Jan 2009
Posts: 513
Likes: 46
Default

Originally Posted by HeavyAssault
Turbo farting is a result of building boost and letting off the accelerator rapidly. My truck does it and the VGT is not "jamming up".

Perhaps i should have said:

Trucks that exhibit turbo farting more frequently likely are in the beginning stages of having the VGT stick.

You can pull the turbo apart and clean it. You may need to replace the unison ring, if the engagement slot is worn from the VGT actuator moving back and forth without the ring moving.
 


Quick Reply: What is wrong with this 6.0?



All times are GMT -5. The time now is 08:26 PM.