Electrical Problem - maybe
#1
Electrical Problem - maybe
2006 F350 4x4 Crew Cab - Automatic 6.0 with just over 105,000 miles
Bought this used with 28,000 - at time of purchase bought extended warranty good to 88,000. At 82,000 heads need replacement (thankfully covered under warranty). Also had new batteries installed
Not a problem since until now. Parked truck in evening - went out next morning and truck would not crank BUT with key in ON position all the dash lights will rapidly flash and sounds like solenoid rapidly opening and closing, tach and speedometer needles "flutter", truck will not crank. Unfortunately I don't have my electrical meter with me but headlights, interior lights, etc all work and appear to be normal brightness.
Attempted to hook up both STC scanner and also Auto Engenuity program and neither can get codes or even work,
Any and all help will be appreciated
Bought this used with 28,000 - at time of purchase bought extended warranty good to 88,000. At 82,000 heads need replacement (thankfully covered under warranty). Also had new batteries installed
Not a problem since until now. Parked truck in evening - went out next morning and truck would not crank BUT with key in ON position all the dash lights will rapidly flash and sounds like solenoid rapidly opening and closing, tach and speedometer needles "flutter", truck will not crank. Unfortunately I don't have my electrical meter with me but headlights, interior lights, etc all work and appear to be normal brightness.
Attempted to hook up both STC scanner and also Auto Engenuity program and neither can get codes or even work,
Any and all help will be appreciated
#2
#3
Problem resolved. There was a problem with the OEM radio/cd player. Long story but short version - even with key off the radio continued to draw juice, or so the dealer told me. Both new batteries were shot and alternator need to be replaced. With the fused pulled for the radio, new batteries (covered under warranty) & alternator I have not had a problem.
Hopefully this was the cause.
Hopefully this was the cause.
Last edited by bkmac; 07-11-2017 at 10:43 AM.
#4