Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

6.0 Glow plug issue

Thread Tools
 
Search this Thread
 
  #1  
Old 12-31-2016 | 09:09 PM
valaden's Avatar
Thread Starter
|
Diesel Fan
Joined: Jul 2013
Posts: 15
Likes: 0
Default 6.0 Glow plug issue

hi guys i am needing to see if any of your guys that are alot smarter about this trucks than i am can help me out
i have a 04 f350 6.0 powerstroke that until lately i havent had any issues starting -15 on some days but reciently i had all 8 injectors replaced (by ford) and now if my block gets below 50 degrees it will not start without a shot of truck dope
if i plug it in i have no issues starting it
i am at a loss to figure this out i have replaced all 8 glow plugs, both harnesses, the control module and the ficm. i have no idea where to go so any help would be appreciated

 
  #2  
Old 01-02-2017 | 04:20 PM
valaden's Avatar
Thread Starter
|
Diesel Fan
Joined: Jul 2013
Posts: 15
Likes: 0
Default

anyone?
 
  #3  
Old 01-02-2017 | 08:07 PM
78F250Cummins's Avatar
Diesel Fan
Joined: Apr 2013
Posts: 31
Likes: 0
From: Albany, Oregon
Default Glowplugs

How is your glow plug relay? Also, can you hear your injectors buzzing when you turn the key on. Seems like your glowplugs arent working at all.
 
  #4  
Old 01-02-2017 | 08:11 PM
78F250Cummins's Avatar
Diesel Fan
Joined: Apr 2013
Posts: 31
Likes: 0
From: Albany, Oregon
Default

I apologize for the last reply I didnt read your post fully. So you replaced all those parts and at this time with key on they all have power? How many volts?
 
  #5  
Old 01-03-2017 | 12:19 AM
valaden's Avatar
Thread Starter
|
Diesel Fan
Joined: Jul 2013
Posts: 15
Likes: 0
Default

i have 12 volts going to the controller,at least on the two large wires going into each side
i pulled a plug wire and with he key on i have 12 volts at the plug
 




All times are GMT -5. The time now is 01:15 PM.