Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Need help 06 6.0 f350

Thread Tools
 
Search this Thread
 
  #1  
Old 08-05-2015 | 09:01 PM
Dino/Diesel's Avatar
Thread Starter
|
Newbie
Joined: Aug 2015
Posts: 3
Likes: 0
From: Center, tx
Default Need help 06 6.0 f350

So this isnt the first time its happened but hasnt sone it in a while(few months or so). Drove it for about 1.5 hrs today no issues what so ever killed it got hair cut then started right back up just fine. Drove another ten minutes pulled into drive thru killed it and it would not crank back up tried and tried and tried to no avail. Let it sit for a couple hrs to cool off like last time and still no avail. Waited a few more hrs and it took it a few times and finally started. Any ideas.
 
  #2  
Old 08-05-2015 | 09:31 PM
Dino/Diesel's Avatar
Thread Starter
|
Newbie
Joined: Aug 2015
Posts: 3
Likes: 0
From: Center, tx
Default

Also had a guy come check it with a scanner dont know brand but it was bigger than i expected to see (size of a laptop) couldnt get the truck to run through fire cycle(injectors) only three to four clicks each time it did it. Fuel filters have been changed a few days ago. Had check engine light on for the longest time had three diff shops run the codes all came up with p0299 turbo underboost for undetermined amount of time turbo works just fine imo spins freely whistles and all that jazz. He was leaning towards hpop or injector oring. Im out of options at this point ive checked fuel filter caps and both have fuel pump works fine.
 
  #3  
Old 08-14-2015 | 08:48 PM
HeavyAssault's Avatar
Diesel Wrench
Joined: Jan 2009
Posts: 854
Likes: 62
From: VA
Default

STC fitting been replaced recently??
 
  #4  
Old 08-14-2015 | 10:11 PM
Dino/Diesel's Avatar
Thread Starter
|
Newbie
Joined: Aug 2015
Posts: 3
Likes: 0
From: Center, tx
Default

Stc fitting? I do not believe it has been changed. But im not getting any codes to determine loss in oil pressure have had two diff scanners on it since the last post. Still getting 0299 turbo under boost. Only code seen on it since purchase. Prefer not to throw parts at it if i can get away with it.
 
  #5  
Old 08-15-2015 | 09:36 AM
HeavyAssault's Avatar
Diesel Wrench
Joined: Jan 2009
Posts: 854
Likes: 62
From: VA
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cramage28
Ford Powerstroke 03-07 6.0L
4
09-20-2015 11:37 AM
jordanokc
Ford Powerstroke 03-07 6.0L
6
02-08-2015 03:59 PM
smbenoit_79
Ford Powerstroke 03-07 6.0L
5
02-02-2015 01:35 PM
dieselbomb
Ford Powerstroke 03-07 6.0L
0
12-19-2014 12:08 PM
angies04
Ford Powerstroke 03-07 6.0L
1
09-29-2014 04:11 PM



Quick Reply: Need help 06 6.0 f350



All times are GMT -5. The time now is 11:19 AM.