Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

2003 Ford F350 6.0 stalled and now won't start

Thread Tools
 
Search this Thread
 
  #1  
Old 12-05-2012 | 09:01 AM
JayJay's Avatar
Thread Starter
|
Newbie
Joined: Nov 2012
Posts: 1
Likes: 0
Default 2003 Ford F350 6.0 stalled and now won't start

while driving on the road my truck stalled and when I tried to restart it, it would not crank over had to tow truck home, changed fuel pump, cam sensor and crank sensor but nothing still doing the same thing. Diesel machanic shop is 2 hours away this is my only ride. Help someone, batteries on the truck keeps dying to hooked it up to charger but won't charge compelety it anyone has anything solutions please I need help Thank you
 
  #2  
Old 12-05-2012 | 10:26 AM
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

It doesn't crank over? Or it wont fire? There's a big difference in the engine not starting and the engine not even cranking over. I'm assuming it's turning over, but not firing right? When you crank it over, are you seeing any smoke out of the exhaust?

Have you tried reading codes? If I had to guess, I'd say high pressure oil pump, but that's only a guess since we have nothing to go off of.

Why was the fuel pump and the two sensors changed? Were there codes thrown for those? I know on these the crank and cam position sensors will throw codes falsely when the truck is cranked over a bunch and doesn't start, but realistically they rarely go bad.

Do you have any way to monitor anything (scanner or an SCT or...?)
 
  #3  
Old 12-05-2012 | 03:40 PM
bobfbigman's Avatar
Diesel Bomber
Joined: Nov 2009
Posts: 1,942
Likes: 144
Default

If it died as you were driving then it is most likely the HPOP failed on you, very few things can make it stall as you are driving and the HPOP failing i number 1. the next would be if the FICM burnt up but I think you need to look at the High Pressure Oil Pump first.
 
  #4  
Old 12-06-2012 | 12:35 AM
ArNy64's Avatar
Diesel Fan
Joined: Jun 2012
Posts: 37
Likes: 1
Default

Check your low pressure oil pump just open your oil filter housing and hold down on the plastic valve at the bottom while somone cranks the motor it should fill up with oil in probably 5 seconds. I went through the same thing before i just didnt test my low oil pump and replaced my hpop and spending more money then i needed.
 




All times are GMT -5. The time now is 09:14 AM.