Really? I think the the UAW members who built that truck might take offense to that statement.

The Nissan Titan introduced in 2004, is a full-size pickup truck produced for the North American market by Nissan. The truck shares the stretched Nissan F-Alpha platform with the Nissan Armada and Infiniti QX56 SUVs, and is manufactured in Canton, Mississippi, United States.:w2:

Great work on the truck by the way. :tu:

So american trucks built with foreign parts are better.:argh:

:rocking:
wow dude this thing is through the roof

Just installed my Valair Dual Disk Yesterday. Man, This thing shifts like butter. No rollover noise, and easy clutch pedal. I can't say enough about Valair, but I will say it's the only clutch I'll be getting from now on! And Dan at Valair is one of the best people I have ever dealt with! Thanks Dan! Will get the new gears in this week the off to the dyno!
Attachment 43426
Attachment 43427
Attachment 43428
Attachment 43429

Did i see this in Diesel Power magazine?

Yea there was a small pic. in the last issue!

What kind of mileage are you getting?

About 17-18 on the interstate

This is really well done project, i can see why you are proud of it, I bet you are well on your way to reaching your goal

Here are a few new pics. of the truck guys. Got my new bumpers on, wrap off and I am getting ready to install the AirDog II 165 when it shows up. Clutch is holding up awesome too! I just pulled my 8900lb. travel trailer with the truck and got 320 miles to the tank got 13.4 MPG too!

Attachment 41217
Attachment 41218
http://i406.photobucket.com/albums/p...k/IMG_3875.jpg
Attachment 41219
Attachment 41220
Attachment 41221

Dang man that is one purdy set up. What axles andaxle ratio are you running. Also what tires?love the cummins Titan idea , nice job.

Sterling 10.5 rear and dana 60HP front, 4.56 gears and 40" Nitto Mud Grapplers

Sweet truck!! IMO looks MUCH better without the wrap!! :c:

I totally agree!

DUDE YOU ROCK! :tu:

I have to agree also, looks great with out the wrap and like a whole different truck! Have you kept a parts list....he he

i still pine for the 4bt for the titans little brother, the frontier

Awsome job man that is a hell of a truck.:c:

Thanks for the comments guys! I have a parts list i need to put together!

oh, do tell...

Most of it is in the Sig. but i'm sure I left a few things out...
I just bought a AirDog II 165 kit to put on when I get home. Would like to get some studs for the truck too!
would like to get to ont he dyno too, I would be stoked if it is around 350HP!

read the whole trip-sweeet.enjoyed the pictures,after all the work and expense-you surely do have a brutal and righous looking truck-great job and great thread.
if i had my way everything i own would be cummins or detroit powered.:rocking:

sweet

Your truck is awesome. :rocking:

It's for sale! And the only reason is I want a Chevy Topkick
05' Nissan Titan SE Crew Cab/ has around 58K Original miles before the Cummins Swap, Now has 61K
Asking $28,000 have well over $80K in the truck
Pensacola, Fl Chris 850-777-6413
or
I will possibly trade for 05 or newer Ram 2500-3500 must be 4x4 and must be quad cab or mega. Would like one with lift and not ragged out! The Titan has been in four mags. to date and one more scheduled in Dec. but photo shoot is over. . has NEVER seen the mud!

-SAS converted with Dana 60 HP front and 4.56 Gears/ Solid Axle diff. cover
-Back Axle is Sterling 10.5 with 4.56's and Ford LSD/ Solid Axle diff. cover
-Radflo 12" Ttravel 2.5 coilovers with 450/750 spring rate and outerwears covers
-Custom Driveshafts
-Bushwacker Flares
-40" Nitto Mud Grapplers on custom 20" Fuel Offroad/ OMF Simulocks has 5 wheels and tires
-2" Wheel Spacers all the way around
-HD Brakes with stainless brake lines
-Nfabworks traction Bars
-Nfabworks Radius Arm 10-16" Lift Kit
-On board air compressor and AirLift bags
-12V P pumped Cummins 5.9L Diesel Motor Mods....
CFM+ Intake Horn, #10 Fuel Plate, 370HP non marine injectors, BW Airworks S300 Turbo, 3K Gov springs, AirDog II 165 Fuel System, 5" Exhaust, 4" intake, intercooled, and on and on
-NV4500 5 speed manual Tranny with Valair 13" Dual disk ceramic clutch kit and upgraded input shaft.
-NP242DHD Transfer case
-Katzkin custom leather grey with orange double stitch.
-Custom Orange/ Black Kevlar dash kit
-Fiberglass Ram Air Hood
-Grill Craft Grill Inserts
-Winch Ready Front and Back bumpers
-Custom mounting brackets for front winch bumper "will not pull off"
-T-Max Pro series 9500 Wireless winch in front with synthetic line "NEVER USED"
-Dual Optima Batteries
-Extang lo pro bed cover
-Line X Extra Bed lining
-Clarion Double din 7" dvd/ radio
-Rockford Aftermarket system with 1000 watt sub for 2- 12" subs and 500 watt for the three component sets.
-Fully Dynamat extreme floor, firewall, and dinapad on firewall as well
-3 Guage pillar with fuel pressure, EGT, and Boost
Everything on the truck is custom! Just ask and I will answer your questions.
It is an 05' there are a 1/2" scratch back driver side door, and some small chips near the bottom of the panel behind the front tires. Apsolutly 0 rust.
Attachment 40745

If I had $28,000 I would gladly take it off your hands, but I will tell all my buddies about.

Did you get my PM

Just checked, I didnt get it?

Can i pay in CASINO CASH :rocking: ???

JK :)

still for sale?

Oops! Forgot to post but it's sold.

whats your reason for getting rid of it? new project?

The ONLY reason I decided to get rid of it is to fund my next two projects.
1) New Topkick Project
2) New 4x10 CNC Plasma / Water Bed Table

04 nissan titan conversion
 

Hey cnallick I have to commend you on ur titan it s a head turner for sure. I have a 04 titan that im looking to convert to a 12valve with a nv4500 behind it. I've been trying to get a list of items I will need and steps to be taken planned out. If u have any pointers, advice or anything please let me know I would greatly appreciate it.

All I can say is WOW Cool project sorry to see it go

Alot of time, work, and thought went into that truck.

i got an 05 titan would like to turn it into a diesel monster just wondering wat id need to make this possible if you dont mind helping me out i see you got urs almost done.

So I'm driving in Nashville TN today and what do I see, your Titan driving down the road. It's a small world after all!!! Very impressive truck, would love to see it up close. :tu:

Yea,
I sure miss it! somehow its on top gun customz website, at first it looked like they were trying to make the impression they built it but it looks like the guy just put there steering kit on it.

it now has a fully built auto in it too

i just fell in love.

If I had the cash, I'd be all over this kind of project.


you should casually post up your parts list and the custom stuff you had to do.
make a little "guide" for all of us to day dream over.