Just another Fummins with lots of pics!
#51
---AutoMerged DoublePost---
Ok so I picked up the NV5600 last nite.
Here in all its dirty glory
Cleaned it up
The custom adapter the previous owner made to adapt the NV5600 to the GM BW4401
All cleaned up and painted
Will be installing it tomorrow
Also, This is the clutch that came with the tranny.
South Bend Con OFE
Good for 475hp 1000ft lbs torque
MU 2001 Con. OFE
Last edited by bajabomber87; 01-29-2010 at 01:58 AM. Reason: Automerged Doublepost
#53
Clutch and flywheel in
Even though I mounted the engine 5-6 inches farther forward than normal, I will have to patch and cut out a new shifter hole in the tranny cover.
Will be picking up some metal to make the tranny crossmember tomorrow morning, then painting the flatbed because I prepped it and finally welded it solid to the frame today, I also raised it to make clearance for the 37's.
Also working on mounting the Airdog tomorrow after the paint is put on.
Even though I mounted the engine 5-6 inches farther forward than normal, I will have to patch and cut out a new shifter hole in the tranny cover.
Will be picking up some metal to make the tranny crossmember tomorrow morning, then painting the flatbed because I prepped it and finally welded it solid to the frame today, I also raised it to make clearance for the 37's.
Also working on mounting the Airdog tomorrow after the paint is put on.
#56
Got the tranny crossmember knocked out today.
I want to add another to help stiffen the frame up and double as a rear mount for a skid plate for the t-case.
#58
Pulled the tanks out. I will be swapping a 96 Dodge Ram fuel tank in their place, that way I don't have to deal with the fuel tank selector, because it will make swapping to the 1/2'' fuel lines a waste if fuel has to pass thru a tiny 1/4'' selector valve.
Figured out why my front and rear fuel tanks couldn't take fuel at full flow at the gas station
Also pulled the rest of the Ford wiring off the truck, including the fuel lines.
If anyone needs anything you have till next Monday when the trash truck comes
Airdog ready to go in, I'll be mounting this in the tool box.
Figured out why my front and rear fuel tanks couldn't take fuel at full flow at the gas station
Also pulled the rest of the Ford wiring off the truck, including the fuel lines.
If anyone needs anything you have till next Monday when the trash truck comes
Airdog ready to go in, I'll be mounting this in the tool box.