Chevy/GMC Duramax 01-04 LB7 Discussion of Chevy and GMC Trucks with LB7 Duramax Turbo Diesel Engines

Where's my water going

Thread Tools
 
Search this Thread
 
  #1  
Old 12-04-2011 | 02:03 PM
Brianestis's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 9
Likes: 0
Default Where's my water going

I have a 2002 duramax with a diablo programmer on it and I'm loosing water I checked the oil and it's ok but she is blowing alot of white out the tail pipe she has tons of power,never overheats and the low coolant light comes on I put 1/2 gallon of water in every 3 or 4 hours thought head gasket but my oil would b trash if it was that right?
 
  #2  
Old 12-04-2011 | 02:14 PM
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

It could be head gasket or leaking injector cups. Does the radiator hose stay hard over night is your coolant discolored?
 
  #3  
Old 12-04-2011 | 02:21 PM
Brianestis's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 9
Likes: 0
Default

Hose is never hard even after I've been working for 3 or 4 hours there is no pressure in the coolant tank top hose is still easy to squeeze.

---AutoMerged DoublePost---

The coolant tank don't hiss when I open it it's like it's he engine has been sitting all night, after she's been running several hours and temp is showing 160 degrees
 

Last edited by Brianestis; 12-04-2011 at 02:21 PM. Reason: Automerged Doublepost
  #4  
Old 12-04-2011 | 02:27 PM
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

Can you see coolant running down the side of the block somewhere? It doesn't sound like a cup leaking, but you can let the truck sit overnight and pull the glow plugs to see if coolant is on the glow plugs. The white smoke has me concerened its leaning towards a hg but not a 100% sure
 
  #5  
Old 12-04-2011 | 02:40 PM
Brianestis's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 9
Likes: 0
Default

I figured hg would contaminat my oil

---AutoMerged DoublePost---

Not diesel inclined never worked on one before

---AutoMerged DoublePost---

Didn't see coolant running down block but did have some pooling off passenger side inside fender
 

Last edited by Brianestis; 12-04-2011 at 02:40 PM. Reason: Automerged Doublepost
  #6  
Old 12-04-2011 | 03:00 PM
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

The passenger side fender means its puking out the coolant reservoir, the glow plugs are on the side of the block just below the valve cover. They have a wire on then held down by a 8mm nut, the glow plug u will need a deep 14mm to remove it.
 
  #7  
Old 12-04-2011 | 04:10 PM
Brianestis's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 9
Likes: 0
Default

Not much but some was there. Couldn't figure why it was there cause system isn't building pressure I'll pull one of the glow plugs in the AM and look or I guess I need to check all of them huh. Since I don't know which one might b leaking
 
  #8  
Old 12-04-2011 | 04:30 PM
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

Yup all if them.
 
  #9  
Old 12-05-2011 | 06:36 PM
Brianestis's Avatar
Thread Starter
|
Newbie
Joined: Dec 2011
Posts: 9
Likes: 0
Default

K my mechanic seems to think head gasket so I guess since we r in the area new injectors are a good idea what do u think stock or 50+ on the injectors they aren't bad I don't think but it would b good insurance to do it now I think.
 
  #10  
Old 12-05-2011 | 06:52 PM
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

The injectors have a sleeve they sit inside of, and its pressed in and sealed with loctite. Sometimes they can come loose.
 


Quick Reply: Where's my water going



All times are GMT -5. The time now is 02:17 AM.