built transmissions
#1
built transmissions
so ive been looking at built trannys and its confusing.... which one do i need best bang for the buck? i only plan on making 650-700hp i dont really want to build the bottom end so some help for experienced bombers would be great
2004LB7 has helped me but i need some more in depth details and options thanks!
im really looking at this they supposedly use the same clutches as sun coast
http://www.pacificp.com/store/index....products_id=58
2004LB7 has helped me but i need some more in depth details and options thanks!
im really looking at this they supposedly use the same clutches as sun coast
http://www.pacificp.com/store/index....products_id=58
Last edited by Walker.B; 11-29-2014 at 10:10 PM.
#3
#4
sorry i havent been on in so long had some crazy stuff going on and im probably going to ZF6 it or build the allison my self go check out my other thread for the updates!
https://www.dieselbombers.com/show-t...7-project.html
https://www.dieselbombers.com/show-t...7-project.html
#5
If you just plan on rebuilding it, ie replacing clutches the most mechanicaly inclined people with out any specialized tools can do it. If you want to "build" it then that is a task for the pros. There is a lot more to making an allison hold more HP then clutchs. There is a bunch of trade secrets too.
you should contact Mike L or Big Dipper and discuss what you want and they can lead you in the right direction.
you should contact Mike L or Big Dipper and discuss what you want and they can lead you in the right direction.
#6
#7
I know Big Dipper is real busy and doesn't normally answer phone calls but i have called Mike L more then once and he was quite helpful. When i spoke to him about building my transmission to hold about 6 or 7 hounded HP he told me it would be a little over $5k
I would try calling Mike L or emailing Big Dipper again and get another quote. It is possible that it was closer $6k because of freight
Good luck Jason
I would try calling Mike L or emailing Big Dipper again and get another quote. It is possible that it was closer $6k because of freight
Good luck Jason
#10