dual cp3 on 6.7 & AirDog 150 completed
#1
11-24-2008 | 07:28 PM
Thread Starter
|
Diesel Bomber
Joined: Aug 2007
Posts: 1,488
Likes: 176
From: Albuquerque
dual cp3 on 6.7 & AirDog 150 completed
Just completed the install of PPE dual CP3 and AirDog 150 on a customers 07 6.7. Install went pretty smooth and we are waiting to get it dyno'd to see the gains of just the fuel system. Currently NO tuning on the truck. We are doing things in stages and going to dyno the truck after each mod. Will keep you all informed as to what we come up with.
Bed off getting ready to do modified liberty canister and 1/2" fuel lines
Our Modified liberty canister
We are making liberty canister mod kits
Machined stainless steel plug for stock fuel line
completed canister install
Bed off getting ready to do modified liberty canister and 1/2" fuel lines
Our Modified liberty canister
We are making liberty canister mod kits
Machined stainless steel plug for stock fuel line
completed canister install
#2
11-24-2008 | 07:37 PM
Thread Starter
|
Diesel Bomber
Joined: Aug 2007
Posts: 1,488
Likes: 176
From: Albuquerque
making room for the second Cp3
In place
we machined an extended fuel pressure fitting so we could get a damn wrench on the fitting. stainless steel
[color=grey][size=-2]
---AutoMerged DoublePost---
we are at 5000 feet elevation and the customer stated that he was not able to do a burnout (remember NO tuning as of yet) before we did the airdog and dual cp3 kit. Now he lites em off and is HAPPY! Will keep everyone updated as to what we are doing. Some things are going to be kept under wraps
til we release them but this thing is going to be a monster.
In place
we machined an extended fuel pressure fitting so we could get a damn wrench on the fitting. stainless steel
[color=grey][size=-2]
---AutoMerged DoublePost---
we are at 5000 feet elevation and the customer stated that he was not able to do a burnout (remember NO tuning as of yet) before we did the airdog and dual cp3 kit. Now he lites em off and is HAPPY! Will keep everyone updated as to what we are doing. Some things are going to be kept under wraps
til we release them but this thing is going to be a monster.
Last edited by cbrahs; 11-24-2008 at 07:38 PM. Reason: Automerged Doublepost
#3
11-24-2008 | 07:37 PM
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
The following users liked this post:
cbrahs (11-24-2008)
#4
11-24-2008 | 08:37 PM
Thread Starter
|
Diesel Bomber
Joined: Aug 2007
Posts: 1,488
Likes: 176
From: Albuquerque
ya it is the lbz second pump. one thing you everyone needs to be aware of is that the LBZ pump does not like a lot of pressure. we are running 8psi and it is rock steady and the needle does not move off of the 8psi mark. when we start tuning, we will play with pressures.
---AutoMerged DoublePost---
we also did the vent line mod while we had things apart.
---AutoMerged DoublePost---
we also did the vent line mod while we had things apart.
---AutoMerged DoublePost---
we also did the vent line mod while we had things apart.
---AutoMerged DoublePost---
we also did the vent line mod while we had things apart.
Last edited by cbrahs; 11-24-2008 at 08:37 PM. Reason: Automerged Doublepost
