5.9L Rotary Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with Rotary Injection Pumps Related To Performance And Longevity

First Gen Boost

Thread Tools
 
Search this Thread
 
  #21  
Old 11-12-2009 | 09:15 PM
tower_ofpower's Avatar
Diesel Bomber
Joined: Jul 2009
Posts: 1,861
Likes: 86
From: Kingwood, WV
Default

Originally Posted by CumminsPowerOrNoPower
thats what i'm saying. the turbo on it now is factory and with the miles that's on it now, and the way it was run before i got it, it's got to be close to self destruction.
i hear that... i bought the truck off my aunt and i know the trucks track record. if i had the money i'd throw a turbo on it like right now just so i can sleep at night... next oil change i'm gonna run some engine flush thru it and see if i can get some of the choke out of the turbo hahaha. poor old girl
 
  #22  
Old 11-12-2009 | 10:09 PM
CumminsPowerOrNoPower's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 86
Likes: 0
Default

there isn't hardly any slop in it. but this truck use to be at a fertilizer plant and this thing was ran hard and put away wet.
 
  #23  
Old 11-14-2009 | 10:00 PM
seandonato73's Avatar
Diesel Wrench
Joined: Oct 2009
Posts: 603
Likes: 9
From: lebanon, Pa
Default

ok look at it like this... i work with a guy with a 93 first gen with well over 350K on his truck, he tows heavy, drives like a 16 year old that just got there DL. his truck is turned up a little and i'm allmost positive he said ge runs around 20-25psi flat out. and his turbo is on from the factory....no problems yet with his, i'm really pushen the boost out of mine at 37psi with a 60mm upgrade wheel, but i only got 160k on my truck. so i don't know if riden them hard an putten them away wet can determine if the turbo is gonna blow or not. i would say how the truck was taken care of will deturmine how the turbo will hold up. if you dont have exsessive play in the shaft then chances are your turbo is fine.
 
  #24  
Old 11-15-2009 | 08:23 PM
muskrat's Avatar
Diesel Wrench
Joined: May 2009
Posts: 538
Likes: 39
From: Bitterroot Valley Mt
Default

I finally got my turbo put together. I'm now pushing 34psi which is about five lbs more than before, but Holy Crap, it gets there in about one second of stepping on it. The 14cm exhaust housing is SICK. I live off of main st. and it is a steep road. Now, when I get on the road and give it any throtle, I leave rubber half way to the top of the hill, completley unintentionaly.
 
  #25  
Old 11-15-2009 | 09:03 PM
tower_ofpower's Avatar
Diesel Bomber
Joined: Jul 2009
Posts: 1,861
Likes: 86
From: Kingwood, WV
Default

Originally Posted by muskrat
I finally got my turbo put together. I'm now pushing 34psi which is about five lbs more than before, but Holy Crap, it gets there in about one second of stepping on it. The 14cm exhaust housing is SICK. I live off of main st. and it is a steep road. Now, when I get on the road and give it any throtle, I leave rubber half way to the top of the hill, completley unintentionaly.
unintentionally my i've been wondering if i should get a 62mm upgrade and the 14cm housing or just get an ATS S3000 or an S300 done up right... eitherway i checked the turbo out today while changing my oil... that "pissed off cat sound" isnt a good thing. before cranking the fuel to it and boosting it the shaft had no radial play, just the typical axial... well its shucking in and out now. not just up and down
 
  #26  
Old 11-15-2009 | 09:30 PM
pocat's Avatar
Diesel Fan
Joined: Oct 2009
Posts: 54
Likes: 0
From: SE TX
Default

I'm able to use a deep 1/4 drive socket to get to my idle jam nut. I used a rachet wrench to get to the jam nut on my full fuel screw.

how do you get more boost from the stock turbo? I maxed at 12 stock.
 
  #27  
Old 11-16-2009 | 08:03 PM
CumminsPowerOrNoPower's Avatar
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 86
Likes: 0
Default

12 psi. stock is weak. mine stock was at 18 ish
 
  #28  
Old 11-16-2009 | 10:41 PM
pocat's Avatar
Diesel Fan
Joined: Oct 2009
Posts: 54
Likes: 0
From: SE TX
Default

mines a first gen ,,, is 12 weak for it?
 
  #29  
Old 11-17-2009 | 07:49 PM
muskrat's Avatar
Diesel Wrench
Joined: May 2009
Posts: 538
Likes: 39
From: Bitterroot Valley Mt
Default

Before I got a fuel pin and did my turbo upgrade I was making 22psi with just the full fuel pin turned in a couple turns, 366 spring, and no afc adjustments.
 
  #30  
Old 11-17-2009 | 09:13 PM
pocat's Avatar
Diesel Fan
Joined: Oct 2009
Posts: 54
Likes: 0
From: SE TX
Default

I saw 14 this morning when it was cold out. I have turned my fuel pin 2 turns. I tried to do the 366 spring but stripped one of the allen screws and will have to take the pump off to get to it to extract it.
 


Quick Reply: First Gen Boost



All times are GMT -5. The time now is 08:27 PM.