Fuel or Programmer ??
#1
Fuel or Programmer ??
A buddy has an 01 dodge with a SuperChip programmer & new LP & a pusher pump.
FP 28# at an idle
Installed a set of 100hp injectors, after install took it for a drive.
While driving we noticed that 4th, 5th & 6th gear it cuts out like it is running out of fuel. FP drops from 28 to about 12.
Cleared all codes and went again & same thing. So we desided to unload the SuperChip & walla ran great?
So desided it might be the pusher, so bypassed & reinstalled the programmer 1 stage at a time, you get to stage 2 and it comes back? Keeps throwing the map sensor code??? Can't remember which one?
If you get on it hard and let off of it..it will die? Sometimes it will hunt for fuel at an idle.
I know i left something out. Any suggestion??
FP 28# at an idle
Installed a set of 100hp injectors, after install took it for a drive.
While driving we noticed that 4th, 5th & 6th gear it cuts out like it is running out of fuel. FP drops from 28 to about 12.
Cleared all codes and went again & same thing. So we desided to unload the SuperChip & walla ran great?
So desided it might be the pusher, so bypassed & reinstalled the programmer 1 stage at a time, you get to stage 2 and it comes back? Keeps throwing the map sensor code??? Can't remember which one?
If you get on it hard and let off of it..it will die? Sometimes it will hunt for fuel at an idle.
I know i left something out. Any suggestion??
#3
#5
#6
At 1 time we had 2 codes ( map & ??? )
Will call him in the morning or maybe he will jump in and help me out here tomorrow.
He is a DB.
#7
#8
#9
#10
Did that, just lower pressure at idle. The LP is an AirTech, they hold about 12-13 at idle and at WOT drops to 10. (without programmer)(just sticks)
When the superchip was reinstalled and started to cut out it dropped to about 6-7. When he let off it died and had to pull start it. Would not start on it's own?
When the superchip was reinstalled and started to cut out it dropped to about 6-7. When he let off it died and had to pull start it. Would not start on it's own?