5.9L 12V Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps Related to Performance and Longevity

loping?

Thread Tools
 
Search this Thread
 
  #1  
Old 08-27-2009 | 11:36 PM
hunter's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2009
Posts: 208
Likes: 0
From: gladeville,tn
Default loping?

so iwas messin around on youtube and found vids of loping trucks.what have these guys done to make there trucks do that ,does it hurt performance or engine life
 
  #2  
Old 08-27-2009 | 11:48 PM
rkadcock's Avatar
N.M. Bombers Director
Joined: Sep 2008
Posts: 797
Likes: 40
From: Corrales New Mexico
Default

I'm pretty sure loping isn't to healthy for the engine. But to do it, turning the fuel delivery up with larger fuel lines will do the trick. Their might be more, but thats what I know....
 
  #3  
Old 08-27-2009 | 11:50 PM
hunter's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2009
Posts: 208
Likes: 0
From: gladeville,tn
Default

well i dont want to doit bu i didnt thank it was to good
 
  #4  
Old 08-27-2009 | 11:54 PM
puffsmokeonya's Avatar
Diesel Enthusiast
Joined: Nov 2008
Posts: 271
Likes: 27
From: harrison arkansas
Default

0.93 lines with connector tubes that makes em lope
 
  #5  
Old 08-28-2009 | 12:05 AM
94cummins12v's Avatar
Diesel Bomber
Joined: Jan 2008
Posts: 4,525
Likes: 103
From: Havre mt
Default

a crap load of fuel, but it is realy bad on an engine
 
  #6  
Old 08-28-2009 | 03:01 AM
Sluggo's Avatar
Diesel Enthusiast
Joined: Sep 2008
Posts: 358
Likes: 14
From: Elko,Nevada
Default

I did the EGR delete on my pickup yesterday, now when I first start it in the morning it lopes bad & puff's white smoke, untill the water temp comes up. I thought it was pretty cool sounding at first, but I'm tierd of it allready. I think I need to remove that servo controled plate in the intake. I envy you guys with the 5.9's I'm working on de-smoging this 6.7 but it sure is a pain. I like rigs you work on with wrenches & sockets not a dam lap top. Guess I'm getting old
 

Last edited by Sluggo; 08-28-2009 at 03:03 AM.
  #7  
Old 08-28-2009 | 10:09 AM
Hammer's Avatar
Diesel Wrench
Joined: Mar 2007
Posts: 714
Likes: 87
From: York,PA
Default

Dude...
Laptop tuning is way too cool...LOL

I actually had someone tell me that at a recent truck show about how out of date I was with my old mechanical truck.It made me get a good laugh though.

On the Loping....
Most of the YouTube videos of the loping trucks will be VP44 trucks equpiied with "Monster Pumps".While they may be very cool sounding they are a real PIA to drive around town and in traffic.You can make a P-Pumped 24v and a 12v lope also with big enough injection lines but once again,the drivability suffers greatly and really makes it a task to drive them at slower speeds.If your pulling or drag racing where all out wide open throttle is used most of the time the larger lines help with fuel supply but other than there I wouldn't use them.

I have 4 sets of lines for my 12v that start at .079 go up to .120.The smaller sets,.079 and .084,are the most street freindly and produce well on the dyno.The .093's are ok on the street,lope a tad bit and loose a little power on a dyno and make daily driving a bit more interesting.The .120's are a real PIA on the street,kill dyno numbers and the constant loping makes daily driving a challenge,however,if wide open throttle is where you run they will make the best choice but thats not me.

Loping sounds cool but to me thats about it.....Andy
 
The following users liked this post:
Mr. Miyagi (08-29-2009)
  #8  
Old 08-28-2009 | 10:12 AM
tower_ofpower's Avatar
Diesel Bomber
Joined: Jul 2009
Posts: 1,861
Likes: 86
From: Kingwood, WV
Default

i'd prefer the rhythmic chug of a decent cam... loping is BA sounding... but cams are just plain sweet... gasser or diesel; gotta love a good cam
 
  #9  
Old 08-28-2009 | 12:01 PM
94 12valve's Avatar
Diesel Bomber
Joined: Jan 2009
Posts: 3,504
Likes: 157
From: Pylesville, Maryland
Default

Originally Posted by Hammer
Dude...
Laptop tuning is way too cool...LOL

I actually had someone tell me that at a recent truck show about how out of date I was with my old mechanical truck.It made me get a good laugh though.

On the Loping....
Most of the YouTube videos of the loping trucks will be VP44 trucks equpiied with "Monster Pumps".While they may be very cool sounding they are a real PIA to drive around town and in traffic.You can make a P-Pumped 24v and a 12v lope also with big enough injection lines but once again,the drivability suffers greatly and really makes it a task to drive them at slower speeds.If your pulling or drag racing where all out wide open throttle is used most of the time the larger lines help with fuel supply but other than there I wouldn't use them.

I have 4 sets of lines for my 12v that start at .079 go up to .120.The smaller sets,.079 and .084,are the most street freindly and produce well on the dyno.The .093's are ok on the street,lope a tad bit and loose a little power on a dyno and make daily driving a bit more interesting.The .120's are a real PIA on the street,kill dyno numbers and the constant loping makes daily driving a challenge,however,if wide open throttle is where you run they will make the best choice but thats not me.

Loping sounds cool but to me thats about it.....Andy
where did you get a set of .084 injectoin lines? I am in need of a set
 
  #10  
Old 08-28-2009 | 07:26 PM
hunter's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2009
Posts: 208
Likes: 0
From: gladeville,tn
Default

hey hammer thinks for the info are you willing to selling the .093 lines just shoot me a pm
 


Quick Reply: loping?



All times are GMT -5. The time now is 11:24 PM.