24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

2001 EGTs too hot for my liking. STILL

Thread Tools
 
Search this Thread
 
  #11  
Old 07-05-2011, 12:28 PM
kingbrad89's Avatar
Diesel Wrench
Thread Starter
Join Date: Jan 2010
Location: MEADVILLE PA
Posts: 500
Likes: 0
Received 36 Likes on 28 Posts
Default 2001 EGTs too hot for my liking. STILL

Bump for any other ideas
 
  #12  
Old 07-05-2011, 12:37 PM
Join Date: Mar 2007
Location: Western NC
Posts: 14,546
Received 843 Likes on 695 Posts
Default Re: 2001 EGTs too hot for my liking. STILL

Try cleaning your intercooler and check your intercooler boots for leaks.

I would also be interested in seeing your drive pressure.

Luke
 
  #13  
Old 07-05-2011, 12:42 PM
Farmboy 2.0's Avatar
Diesel Bomber
Join Date: Feb 2010
Location: N. Idaho
Posts: 2,386
Received 162 Likes on 143 Posts
Default

I agree with luke on cleaning the intercooler and do you have a exhaust manifold?
 
  #14  
Old 07-05-2011, 01:42 PM
kingbrad89's Avatar
Diesel Wrench
Thread Starter
Join Date: Jan 2010
Location: MEADVILLE PA
Posts: 500
Likes: 0
Received 36 Likes on 28 Posts
Default 2001 EGTs too hot for my liking. STILL

I'm pretty sure I don't have any leaks. Like I said it'll run about 55 psi without a problem, just hot. By cleaning the intercooler i assume you mean making sure the outside fins are clear of buildup, and it's pretty clean. I am running the stock exhaust manifold, but I can't see a 3 piece making a couple hundred degrees difference. I would imagine it might drop it 50-75 deg, am I right?
 
  #15  
Old 07-05-2011, 02:02 PM
Farmboy 2.0's Avatar
Diesel Bomber
Join Date: Feb 2010
Location: N. Idaho
Posts: 2,386
Received 162 Likes on 143 Posts
Default

I saw right around 100-125 when I went to my BD Manifold
 
  #16  
Old 07-05-2011, 02:10 PM
H.R.D's Avatar
Super Moderator
iTrader: (3)
Join Date: Dec 2010
Location: Las Cruces, NM
Posts: 3,763
Received 1,052 Likes on 557 Posts
Default

I think some bigger sticks are gonna help you spool up and keep egt's in check like 01quadcab said. If you still have high egt's maybe some "drugs" are in order.

But I do agree with you as it shouldn't be that high under normal driving conditions.
 
  #17  
Old 07-10-2011, 12:05 AM
jkidd's Avatar
Diesel Bombers Sponsor
Join Date: Jan 2008
Location: Kaysville UT
Posts: 1,100
Received 77 Likes on 71 Posts
Default

Many people set up twins incorrectly. You want to tune the twins so that drive pressure and boost are at about a 1:1 ratio and close to a 50/50 split on the two turbos.

Often people forget to LOWER the boost of the top turbo creating a situation where the top turbo is doing most of the work, over spinning. With the wastegate actuator set too high (for twins set the actuator to open at 25psi for most cases) high drive pressures result which impedes the flow to the bottom turbo. You want the top turbo to light fast so that it can "wake" the bottom turbo faster.

If you leave the top turbo to wastegate at a higher (or stock setting) it can result in higher temps and greater drive pressure because the air is forced to go through the turbine wheel instead of bypassing the wheel and going directly to spool up the bottom turbo.
 
  #18  
Old 07-10-2011, 10:26 AM
kingbrad89's Avatar
Diesel Wrench
Thread Starter
Join Date: Jan 2010
Location: MEADVILLE PA
Posts: 500
Likes: 0
Received 36 Likes on 28 Posts
Default 2001 EGTs too hot for my liking. STILL

Good info. My problem however isn't necessarily at WOT when boost/drive pressure is high, it's low rpm highway speed and taking off from a red light. It just runs hot daily driving. I think I need some 200's or 250's to get those things spooled and get the air moving.
 




All times are GMT -5. The time now is 07:12 AM.