24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

2001 24v issues

Thread Tools
 
Search this Thread
 
  #1  
Old 03-18-2015 | 05:25 PM
octopusmotor's Avatar
Thread Starter
|
Newbie
Joined: Mar 2015
Posts: 3
Likes: 0
From: Northglenn, CO
Default 2001 24v issues

I am new to forums and dont really know where to put this. Sorry if I screwed up!!!


I have a 2001 CTD with a couple of issues that I have not been able to pinpoint.
1. Miss at idle. Hot, cold, doesn't matter. Tach bounces and you can feel the truck missing. Has done it ever since I owned the truck. I have a new VP44 with less than 5k on it from Gillette Diesel and it didn't clear up the problem. It had the same issue with the old VP as well
2. My fuel pressure holds at 20 psi at idle, drops to 14-15 on the highway @ WOT doesn't seem to be an issue but if i turn the truck off and go inside for 20 minutes and go back to the truck, my fp gauge reads 0 psi with the truck off. Should it read 0 before cranking? I figure it should still have some residual pressure from the last time it was running.
3. When revving the truck and letting the rpm come down on their own, the motor "surges" when it comes back down to 750 rpm. It does it when you're driving as well. Doesn't seem to affect driving but I would like to know what is causing it.

It has been tuned with a super chips 3705 on perf settings. I have returned truck to stock and has not cleared up idle issues.

Thank you in advance for any insight you can provide!!
 
  #2  
Old 03-19-2015 | 12:41 PM
Dieselohic's Avatar
Newbie
Joined: Mar 2015
Posts: 3
Likes: 1
Default

air in fule system maybe

what pump are u using?? electric or mech sending
 
  #3  
Old 03-19-2015 | 12:47 PM
octopusmotor's Avatar
Thread Starter
|
Newbie
Joined: Mar 2015
Posts: 3
Likes: 0
From: Northglenn, CO
Default

Could be air. Ill check the return line for leaks. Using a fass DDRP.
 
  #4  
Old 03-19-2015 | 03:22 PM
Bigg Redd's Avatar
Diesel Bomber
Joined: Oct 2010
Posts: 2,448
Likes: 311
From: TEXAS
Default

Any blow-by issues? An f'd up injector, a burnt valve, worn cam lobe, or even excessively loose rocker arm (tapping noise?) sticky valve or lifter, all come to mind.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dslmech600
Diesel In Distress - Support Ticket
20
08-02-2015 10:25 AM
J. Nick
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
04-25-2015 06:01 PM
rrough96
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
02-21-2015 12:26 PM
cummins Pride
24 Valve 2nd Gen Dodge Cummins 98.5-02
7
01-31-2015 11:42 AM
metrickjb
24 Valve 2nd Gen Dodge Cummins 98.5-02
5
01-21-2015 05:16 AM




All times are GMT -5. The time now is 05:35 PM.