Just bought a 90 w/250 4x4 lb 5 speed reg cab with manual locks and windows. is it possible and how to install electric windows and locks. Also were would be the best place to get a 40-20-40 seat for this thing? Thanks much

 

Your best bet would be to find what you want in a salvage yard on another truck. If it isn't the same year, check with a parts house to see if they interchange. You will have to move the wiring as well. When you check out the donor truck, see where it all plugs into the harness for power to make sure your truck has the connector. If not you will have to wire power to the new accessories. I am willing to bet the connector(s) are there waiting to be used.
For the seat, depending what you want; almost any will do. Check out how the others mount and the dimensions. I have used seats from different rigs before. Might require some fab work for mounts and what not, but it can be done without too much trouble.
HTH,
Dan

 

Thank you. I am deffinately looking foward to putting a different seat in. i hate those firts generation dodge bench seats.